欢迎光临河北中正铜工艺品制造有限公司官方网站 收藏本站|关于我们| 在线咨询
当前位置: 首页 > 新闻资讯

人物雕塑制作后的处理

文章出处:中正雕塑 人气:发表时间:2021-7-24 8:59:59

铸铜人物雕塑抛光与打磨技巧:在完成人物雕塑作品的锻造工艺后,要认真观看你面前的人物雕塑,人物雕塑加工如发现在加工制作过程中留下焊点以及边缘的毛刺,应进行打磨、抛光。在对人物雕塑作品打磨时,首先进行粗磨,可利用角磨机打磨掉人物雕塑上的焊点及雕塑边缘的毛刺。

Polishing and polishing skills of cast copper figure sculpture: after completing the forging process of figure sculpture works, you should carefully watch the figure sculpture in front of you. If you find solder joints and burrs on the edges during the processing and manufacturing process, you should polish and polish them. When polishing the figure sculpture works, first carry out rough grinding, and the angle grinder can be used to polish the solder joints on the figure sculpture and the burrs on the edge of the sculpture.


欧式西方人物铜雕塑.jpg


然后利用细砂布、细砂纸、锉刀、什锦锉等工具进行细磨。打磨完成后,最后用抛光机进一步精抛光,除去一切留下的工作痕迹,使其光滑、平整、精美。人物雕塑制作完成后,根据其材料的不同性质,选择合适的方法进行表面处理。如红铜的清洗。

Then use fine abrasive cloth, fine abrasive paper, file, assorted file and other tools for fine grinding. After polishing, the polishing machine shall be used for further fine polishing to remove all work traces left, so as to make it smooth, flat and exquisite. After the production of figure sculpture, appropriate methods are selected for surface treatment according to the different properties of its materials. Such as red copper cleaning.


圣女室外喷泉雕塑.jpg


首先需要用稀释的硫酸液将红铜表面进行刷洗,除去人物铜雕表面的油污、锈垢,然后用自来水冲洗掉具有腐蚀性的稀硫酸,这样就可以为人物雕塑进行表面着色。先将化学药剂倒入玻璃容器中,然后用干净的毛刷将化学药水涂刷在人物雕塑表面进行化学腐蚀。

First, the red copper surface needs to be brushed with diluted sulfuric acid to remove the oil and rust on the surface of the figure bronze sculpture, and then the corrosive dilute sulfuric acid is washed off with tap water, so that the surface of the figure sculpture can be colored. First pour the chemical into the glass container, and then brush the chemical solution on the surface of the figure sculpture with a clean brush for chemical corrosion.


西方公园人物铜像铸造.jpg


稍后等色彩附着在雕塑表面后,用铜刷抛刷,其后用清水洗净擦干,上光、打蜡、保护其表面,最终完成人物雕塑制作。大型人物雕塑在一定的程度上使城市活跃起来,因为矗立在各个城市的人物雕塑不仅是为美化环境而建立,它的存在还对现代城市的生存具有特殊意义。

Later, after the color is attached to the surface of the sculpture, it is polished with a copper brush, then washed and dried with clean water, polished, waxed and protected, and finally the production of figure sculpture is completed. To a certain extent, large-scale figure sculpture makes the city active, because the figure sculpture standing in each city is not only established to beautify the environment, but also has special significance for the survival of modern cities.


首页 | 关于我们 | 工程案例 | 产品中心 | 客户见证 | 常识问答 | 新闻资讯 | 荣誉资质 | 泥塑鉴赏 | 联系我们